Working on cars can be an enjoyable pastime that not only relaxes you but accomplishes a task as well. Whether your car was hit in the front, you installed a new body kit, or your headlights have just never lined up correctly, aligning your car's headlights can be completed in a few minutes of work.
Step 1
Park the car facing a dark wall. This process works best when it is dusk or dawn as the lights will show up better on the wall and provide a more accurate view of how the lights currently line up. Turn the low beam headlights on.
Step 2
Instruct your helper to sit in the car and see where the lights hit the wall currently. Whichever light is highest on the wall will be the light you line the other up with at first.
Step 3
Pop the hood and examine the top of the driver's side headlight. There should be a screw in the middle of the top of the headlight to adjust the windage of the headlight beam. Using the screwdriver, turn the screw clockwise to make the beam shine lower and turn it counterclockwise to make the beam point higher on the wall.
Step 4
Use the adjustment screws to line up the two headlights on low beams, and then turn on the car's high beams and check for alignment again. Use feedback from your helper to discern where and how much to move the beams.
Source : ehow.com
----------------------------
Ground Protection Hire-Mr Plant Hire provides ground protection mats and TrakMats for hire at the very best rates across London and the South East. TrakMats prevent environmental and ground damage, bogged down vehicles and slip hazards for staff.
Thursday, 6 May 2010
How to Restore Car Headlights
How to Restore Car Headlights
Car headlights sometimes become cloudy and less effective than they should be. This not only makes your vehicle look less attractive, but it can also create a dangerous situation when driving at night. Some people waste money unnecessarily by purchasing entirely new headlights when this happens, but you can easily and inexpensively restore your own car headlights. Your lights will look like new and you'll keep money in your pocket.
Step 1
Purchase a headlight restoration kit. The leading kit on the market is the Crystal View kit, which costs around $20 and is sold at places like K-Mart, Wal-Mart and Advanced Auto Parts. It can also be purchased online at the Crystal View website (see Resources).
Step 2
Verify that all parts to your headlight restoration kit are included in the box. There should be two pouches marked CV#1, four pouches marked CV#2, two pieces of brown sandpaper, two pieces of blue sandpaper, four hydro-weave cloths, and a glove. There should also be a set of written instructions.
Step 3
Wash your headlights with soap and water. It is important to have a clean surface before you begin restoring your headlights. This prevents your restoration supplies from being wasted on removing simple surface dirt and grime.
Step 4
Perform the initial sanding. First spray a mist of water onto the headlight. This acts as a lubricant for the sandpaper. Then, take one of the sheets of brown sandpaper and use it to thoroughly sand the surface of the lens. This removes most of the residue that is fogging the headlight. Finally, wipe the lens with a paper towel to remove any lose residue from sanding.
Step 5
Perform the second sanding. Again, start by misting water onto the headlight. This time, use one of the sheets of blue sandpaper to refine and smooth out your initial sanding. After you have sanded the entire headlight, use a paper towel to wipe the surface clean once more.
Step 6
Polish the headlight. Open one of the pouches marked CV#1 and pour a generous amount of this thick liquid onto one of the hydro-weave cloths. Firmly rub the cloth over the surface of the lens to polish the entire headlight. If the polishing solution begins to dry before you finish, either add more CV#1 to your cloth or spray water onto the headlight lens to reactivate the solution.
Step 7
Clean the headlight. Use a damp cloth to clean the entire surface. Scrub the surface as hard as is necessary to remove any remaining residue before proceeding to Step 8 when you'll apply sealant.
Step 8
Apply the clear coat sealant to the headlight. Open one of the pouches marked CV#2 and pour the contents onto one of the hydro-weave cloths. The solution can pour out quickly, so go slowly to allow the liquid to soak into the cloth. When all the solution is soaked in, make long, smooth swipes across the headlight, from one side to the other, until you have coated the entire surface. Wait 2 minutes for this initial coat to dry.
Step 9
Apply a second coat of sealant. Use a new hydro-weave cloth and a new pouch of CV#2. Do everything exactly as you did in Step 8, applying a full second coat over the first.
Step 10
Clean up any excess clear coat. Most headlight restoration products are paint-safe, but the clear coat that was applied in Steps 8 and 9 will harden over the top of paint or chrome if it is left alone. If you accidentally get the clear coat onto other areas of the car, simply wash it with a damp cloth before it dries.
Step 11
Return to Step 1 and repeat the entire process on the other headlight. A headlight restoration kit should contain enough supplies to clean, polish and restore both of your car's headlights. There is no need to purchase a separate kit.
Source : ehow.com
Car headlights sometimes become cloudy and less effective than they should be. This not only makes your vehicle look less attractive, but it can also create a dangerous situation when driving at night. Some people waste money unnecessarily by purchasing entirely new headlights when this happens, but you can easily and inexpensively restore your own car headlights. Your lights will look like new and you'll keep money in your pocket.
Step 1
Purchase a headlight restoration kit. The leading kit on the market is the Crystal View kit, which costs around $20 and is sold at places like K-Mart, Wal-Mart and Advanced Auto Parts. It can also be purchased online at the Crystal View website (see Resources).
Step 2
Verify that all parts to your headlight restoration kit are included in the box. There should be two pouches marked CV#1, four pouches marked CV#2, two pieces of brown sandpaper, two pieces of blue sandpaper, four hydro-weave cloths, and a glove. There should also be a set of written instructions.
Step 3
Wash your headlights with soap and water. It is important to have a clean surface before you begin restoring your headlights. This prevents your restoration supplies from being wasted on removing simple surface dirt and grime.
Step 4
Perform the initial sanding. First spray a mist of water onto the headlight. This acts as a lubricant for the sandpaper. Then, take one of the sheets of brown sandpaper and use it to thoroughly sand the surface of the lens. This removes most of the residue that is fogging the headlight. Finally, wipe the lens with a paper towel to remove any lose residue from sanding.
Step 5
Perform the second sanding. Again, start by misting water onto the headlight. This time, use one of the sheets of blue sandpaper to refine and smooth out your initial sanding. After you have sanded the entire headlight, use a paper towel to wipe the surface clean once more.
Step 6
Polish the headlight. Open one of the pouches marked CV#1 and pour a generous amount of this thick liquid onto one of the hydro-weave cloths. Firmly rub the cloth over the surface of the lens to polish the entire headlight. If the polishing solution begins to dry before you finish, either add more CV#1 to your cloth or spray water onto the headlight lens to reactivate the solution.
Step 7
Clean the headlight. Use a damp cloth to clean the entire surface. Scrub the surface as hard as is necessary to remove any remaining residue before proceeding to Step 8 when you'll apply sealant.
Step 8
Apply the clear coat sealant to the headlight. Open one of the pouches marked CV#2 and pour the contents onto one of the hydro-weave cloths. The solution can pour out quickly, so go slowly to allow the liquid to soak into the cloth. When all the solution is soaked in, make long, smooth swipes across the headlight, from one side to the other, until you have coated the entire surface. Wait 2 minutes for this initial coat to dry.
Step 9
Apply a second coat of sealant. Use a new hydro-weave cloth and a new pouch of CV#2. Do everything exactly as you did in Step 8, applying a full second coat over the first.
Step 10
Clean up any excess clear coat. Most headlight restoration products are paint-safe, but the clear coat that was applied in Steps 8 and 9 will harden over the top of paint or chrome if it is left alone. If you accidentally get the clear coat onto other areas of the car, simply wash it with a damp cloth before it dries.
Step 11
Return to Step 1 and repeat the entire process on the other headlight. A headlight restoration kit should contain enough supplies to clean, polish and restore both of your car's headlights. There is no need to purchase a separate kit.
Source : ehow.com
Saturday, 10 April 2010
Tips for buying a new car
New Car Buying Tips
There are a large number of factors which must be considered when buying a new car. As the purchase is likely to be large in comparison to others made during day to day life, it’s worth stopping and considering each point in turn.
How much should you spend?
This is the most important point to consider. Decide on a maximum price and stick to it. Buying a car involves expenses such as dealer delivery, stamp duty, insurance and registration. Remember to allow for these in your budget.
If you are borrowing money it is best to arrange finance beforehand. The amount you can afford to borrow may determine your budget. Make sure to carefully check the interest rates and loan conditions as they usually vary between financial institutions. Examine the loan repayments carefully – do they allow for changes in your income or interest rates?
Test driving a car
Test driving the vehicle you are interested in buying is crucial. A car may have all the features you are after, but once you drive it you may find that the driving position is too uncomfortable, the ride too harsh or the gear change is not as smooth as you’d like.
Before driving ask the dealer of your legal liability should you be involved in an accident. Once this has been established take the car for a drive for at least 20 minutes along a variety of different roads if possible. Try parking it and perform a U-turn to establish the turning circle. While you’re driving, you’ll have the opportunity to have a good look at the features.
Once you’ve returned to the dealership don’t get carried away telling the salesperson how much you might like the car – keep a level head for the negotiating process.
Warranties
A warranty is your guarantee that should any faults become apparent within the warranty period, you won’t have to pay to have them repaired.New cars must have a minimum 12 month or 20,000 km warranty (which ever occurs first). Most new cars now come with a much longer warranty and dealers use them as a selling point of the car.For an additional fee or for abiding by certain conditions, some dealers offer extended warranty schemes above the manufacturer’s period. Read carefully what those conditions are and weigh up whether it’s worth agreeing to.
Choosing the right car
Ask yourself what kind of driving you will be doing in the vehicle and whether this may change in the future.Questions like how many people will the vehicle usually carry and whether it will be required to tow a caravan or trailer will help determine the type of vehicle and engine size.If you plan to tow, a six cylinder engine would be best suited. However, if your driving will be done mainly in the metropolitan area, then a four cylinder model may be best.Think about how much you can spend each week to run the car. The more cylinders, the higher the registration and usually, the higher the fuel consumption.Also consider that it may be harder to obtain parts for a less popular model of car.
Trading in
Trading in your current car can remove the hassle of selling privately, but it will most likely mean you will not get as much money for it.If you do decide to trade in, ask the dealer for the total changeover price. This is how much you’ll have to pay to leave your old car there and drive away in the new one. Don’t let the dealer confuse you.
Agreeing to the price.
It pays to shop around for the best deal. You may be able to negotiate a better price for your chosen vehicle.Ensure you’re aware of what the extra costs of buying the car will be including stamp duty, dealer delivery, registration, etc.Try and visit as many dealers as possible to get the best price. Ask the dealer if they can do a better price than the last.
Tuesday, 16 March 2010
Complete Auto Mobile Parts
Carcustomzheadlight always provide you with a complete line of the highest quality import car parts, performance truck parts, and custom automobile parts. Highly dependable and proven interior and exterior parts, automobile and truck engine parts, as well as auto accessories are in stock to ensure we meet all your standards and preferences. Adding to your satisfaction is our hassle-free website, comprehensive and user-friendly parts catalog that guarantees you a convenient shopping experience online.
So if you are in need of excellent quality replacement or restoration parts like Volvo parts, Chevy truck parts, Dodge parts, or Nissan parts fast and easy, drop us a line and we will be glad to give you our best services.
Wednesday, 24 February 2010
Headlight Smoked Tint Kits
Headlight Smoked Tint Kits and Fog Light Protection Kits allow you to modify the color of your lens to a smoke, blue or yellow hue by simply applying a thin precut film onto the lens. Rvinyl also offers a full line of smoked Tail Light Tint Kits. These precut kits are available in non-protective as well as protection film options. Use our universal smoke wrap kits to add a customized look to the exterior of any vehicle.
Monday, 15 February 2010
smoked tail lights
Lights are the illuminating parts of a vehicle. Installing lights in your vehicle is very important because it is necessary for night driving. A smoked taillight
serves many purposes such as providing safety and a better look also. The headlight in the front side enhances the look of a vehicle as well as provides light for night driving. But do you know why tail lights are important? During the night driving tail lights are used to warn the vehicles which are in the backside. Especially it warns the vehicle backside that you are applying brake because when you press your vehicle’s brake then it emits. And this gives the warning to the driver of backside vehicle to slow down their speed. Tail lights are needed much when you are driving through poorly lit areas. Tail lights are also called tail lamp, rear tail lamp or stop lamp.
Thursday, 28 January 2010
headlight protection
Lights are the illuminating parts of a vehicle. Installing lights in your vehicle is very important because it is necessary for night driving. A smoked taillight
serves many purposes such as providing safety and a better look also. The headlight in the front side enhances the look of a vehicle as well as provides light for night driving. But do you know why tail lights are important? During the night driving tail lights are used to warn the vehicles which are in the backside. Especially it warns the vehicle backside that you are applying brake because when you press your vehicle’s brake then it emits. And this gives the warning to the driver of backside vehicle to slow down their speed. Tail lights are needed much when you are driving through poorly lit areas. Tail lights are also called tail lamp, rear tail lamp or stop lamp.
Posted by carcustomzheadlight.blogspot.com
serves many purposes such as providing safety and a better look also. The headlight in the front side enhances the look of a vehicle as well as provides light for night driving. But do you know why tail lights are important? During the night driving tail lights are used to warn the vehicles which are in the backside. Especially it warns the vehicle backside that you are applying brake because when you press your vehicle’s brake then it emits. And this gives the warning to the driver of backside vehicle to slow down their speed. Tail lights are needed much when you are driving through poorly lit areas. Tail lights are also called tail lamp, rear tail lamp or stop lamp.
Posted by carcustomzheadlight.blogspot.com
Subscribe to:
Posts (Atom)